Ian Tate Ian Tate's Profile Page

Ian Tate Ian Tate

0 Course Enrolled • 0 Course Completed

Biography

Excellent Associate HPE7-A01 Level Exam by TorrentValid

Our HPE7-A01 real dumps was designed by many experts in different area, they have taken the different situation of customers into consideration and designed practical HPE7-A01 study materials for helping customers save time. Whether you are a student or an office worker,we believe you will not spend all your time on preparing for HPE7-A01 Exam. With our simplified information, you are able to study efficiently.

By becoming Aruba Certified Campus Access Professionals, IT professionals can enhance their credibility and demonstrate their expertise in designing and deploying secure wireless networks using Aruba products and solutions. Aruba Certified Campus Access Professional Exam certification can also lead to career advancement opportunities and increased earning potential. Additionally, certified professionals gain access to Aruba's online community of experts, which provides opportunities for networking, knowledge sharing, and professional development.

The Aruba Certified Campus Access Professional Exam certification is relevant for network professionals who work with Aruba solutions and want to gain recognition for their skills and knowledge. Candidates who pass the HP HPE7-A01 Exam will prove their expertise in a range of areas including protocols, network design, and access control. With this certification, IT professionals are in a better position to design, implement, and manage Aruba networks, thereby increasing their chances of growth within their organization.

HP HPE7-A01 certification exam is designed for IT professionals who want to validate their knowledge and skills related to Aruba campus access solutions. HPE7-A01 exam is intended for individuals who have experience in designing, implementing, and managing Aruba wireless and wired networks. The HPE7-A01 certification is offered by Hewlett Packard Enterprise (HPE), a leading provider of IT solutions, software, and services.

>> Associate HPE7-A01 Level Exam <<

HP HPE7-A01 Pass-Sure Associate Level Exam

You can get the downloading link and password within ten minutes after payment. Aruba Certified Campus Access Professional Exam HPE7-A01 exam dumps contain both questions and answers, and it’s convenient for you to check your answers. Aruba Certified Campus Access Professional Exam HPE7-A01 training materials are high-quality and high accuracy, since we are strict with the quality and the answers. We ensure you that HPE7-A01 Exam Dumps are available, and the effectiveness can be also guarantees.

HP Aruba Certified Campus Access Professional Exam Sample Questions (Q54-Q59):

NEW QUESTION # 54
When setting up an Aruba CX VSX pair, which information does the Inter-Switch Link Protocol configuration use in the configuration created?

A. QSVI
B. MAC tables
C. RPVST+
D. UDLD

Answer: D

Explanation:
Explanation
UDLD (Unidirectional Link Detection) is the information that the Inter-Switch Link Protocol configuration uses in the configuration created for Aruba CX VSX pair inter-switch-link. UDLD is a protocol that detects unidirectional links between switches and prevents loops or black holes in the network. UDLD is enabled by default on all ports that are part of the inter-switch-link between VSX peers. The other options are incorrect because they are either not related to inter-switch-link or not supported by Aruba CX VSX. References:
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch07.html
https://www.arubanetworks.com/techdocs/AOS-CX/10.04/HTML/5200-6728/bk01-ch02.html

NEW QUESTION # 55
A customer just upgraded aggregation layer switches and noticed traffic dropping for 120 seconds after the aggregation layer came online again. What is the best way to avoid having this traffic dropped given the topology below?

A. Configure the linkup delay timer to 240 seconds to double the amount of lime for the initial phase to sync
B. Configure the linkup delay timer to exclude LAGS 101 and 102, which will allow time for routing adjacencies to form and to learn upstream routes
C. Configure the linkup delay timer to include LAGs 101 and 102, which will allow time for routing adjacencies lo form and to learn upstream routes
D. Configure the linkup delay timer to 120 seconds, which will allow the right amount of time for the initial phase to sync

Answer: C

Explanation:
The reason is that the linkup delay timer is a feature that delays bringing downstream VSX links up, following a VSX device reboot or an ISL flap. The linkup delay timer has two phases: initial synchronization phase and link-up delay phase.
The initial synchronization phase is the download phase where the rebooted node learns all the LACP+MAC+ARP+STP database entries from its VSX peer through ISLP. The initial synchronization timer, which is not configurable, is the required time to download the database information from the peer.
The link-up delay phase is the duration for installing the downloaded entries to the ASIC, establishing router adjacencies with core nodes and learning upstream routes. The link-up delay timer default value is 180 seconds. Depending on the network size, ARP/routing tables size, you might be required to set the timer to a higher value (maximum 600 seconds).
When both VSX devices reboot, the link-up delay timer is not used.
Therefore, by configuring the linkup delay timer to include LAGs 101 and 102, which are part of the same VSX device as LAG 201, you can ensure that both devices have enough time to synchronize their databases and form routing adjacencies before bringing down their downstream links.

NEW QUESTION # 56
A customer wants to provide wired security as close to the source as possible The wired security must meet the following requirements:
-allow ping from the IT management VLAN to the user VLAN
-deny ping sourcing from the user VLAN to the IT management VLAN
The customer is using Aruba CX 6300s
What is the correct way to implement these requirements?

A. Apply an inbound ACL on the user VLAN allowing icmp echo-reply traffic toward the IT management VLAN
B. Apply an inbound ACL on the user VLAN denying icmp echo traffic toward the IT management VLAN
C. Apply an outbound ACL on the user VLAN allowing temp echo-reply traffic toward the IT management VLAN
D. Apply an outbound ACL on the user VLAN denying icmp echo traffic toward the IT management VLAN

Answer: B

Explanation:
An inbound ACL is applied to traffic entering a port or VLAN. An outbound ACL is applied to traffic leaving a port or VLAN4. To deny ping sourcing from the user VLAN to the IT management VLAN, an inbound ACL on the user VLAN should be used to filter icmp echo traffic toward the IT management VLAN. Icmp echo-reply traffic is not needed to be allowed because it is already permitted by default5.
References: 4
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-9B8F6E8F-9C7A-4F0D-AE7B-
9D8E
https://techhub.hpe.com/eginfolib/Aruba/OS-CX_10.04/5200-6692/GUID-0C3A9D0F-6E5B-4E1A-AF3C-
8D8

NEW QUESTION # 57
Which feature supported by SNMPv3 provides an advantage over SNMPv2c?

A. GetBulk
B. Community strings
C. Encryption
D. Transport mapping

Answer: C

Explanation:
Explanation
Encryption is a feature supported by SNMPv3 that provides an advantage over SNMPv2c. Encryption protects the confidentiality and integrity of SNMP messages by encrypting them with a secret key. SNMPv2c does not support encryption and relies on community strings for authentication and authorization, which are transmitted in clear text and can be easily intercepted or spoofed. Transport mapping, community strings, and GetBulk are features that are common to both SNMPv2c and SNMPv3. References:
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/snmp/snmp.htm
https://www.arubanetworks.com/techdocs/ArubaOS_86_Web_Help/Content/arubaos-solutions/snmp/snmpv3.htm

NEW QUESTION # 58
Your customer currently has Iwo (2) 5406 modular switches with MSTP configured as their core switches. You are proposing a new solution. What would you explain regarding the Aruba CX VSX switch pair when the Primary VSX node is replaced and the system MAC is replaced?

A. During the initial VSX configuration, the system-mac is assigned with a fixed MAC based on VSX ID.
B. Configure vMAC on the Primary VSX node under VSX to retain MAC after hardware replacement.
C. VSX will select the MAC address from a node that is the lower ID.
D. VSX will select the MAC address from a node that is a higher ID.

Answer: A

Explanation:
The system-mac command is used to configure a fixed MAC address for the VSX system. This MAC address is used as the source MAC address for all routed traffic from the VSX node. The system-mac command is highly recommended for preventing traffic disruptions when the primary VSX switch restores after the secondary VSX switch, such as during a primary switch hardware replacement or a power outage. During the initial VSX configuration, the system-mac is assigned with a fixed MAC based on VSX ID. The system-mac command can be used to change this default MAC address if needed.

NEW QUESTION # 59
......

There are three versions of our HPE7-A01 study questions on our website: the PDF, Software and APP online. And our online test engine and the windows software of the HPE7-A01 guide materials are designed more carefully. During our researching and developing, we always obey the principles of conciseness and exquisiteness. All pages of the HPE7-A01 Exam simulation are simple and beautiful. As long as you click on them, you can find the information easily and fast.

Vce HPE7-A01 Torrent: https://www.torrentvalid.com/HPE7-A01-valid-braindumps-torrent.html