JN0-637 New Braindumps Pdf | JN0-637 Pass Test Guide

After the payment for our JN0-637 exam materials is successful, you will receive an email from our system within 5-10 minutes; then, click on the link to log on and you can use JN0-637 preparation materials to study immediately. In fact, you just need spend 20~30h effective learning time if you match JN0-637 Guide dumps and listen to our sincere suggestions. Then you will have more time to do something else you want.

The Juniper JN0-637 exam questions are being updated on a regular basis. As you know the JN0-637 exam syllabus is being updated on a regular basis. To add all these changes in the JN0-637 exam dumps we have hired a team of exam experts. They regularly update the Juniper JN0-637 Practice Questions as per the latest Juniper JN0-637 exam syllabus. So you have the option to get free JN0-637 exam questions update for up to 1 year from the date of Juniper JN0-637 PDF dumps purchase.

>> JN0-637 New Braindumps Pdf <<

2025 High Hit-Rate Juniper JN0-637: Security, Professional (JNCIP-SEC) New Braindumps Pdf

Juniper is one of the international top companies in the world providing wide products line which is applicable for most families and companies, and even closely related to people's daily life. Passing exam with JN0-637 valid exam lab questions will be a key to success; will be new boost and will be important for candidates' career path. Juniper offers all kinds of certifications, JN0-637 valid exam lab questions will be a good choice.

Juniper JN0-637 Exam Syllabus Topics:

Topic	Details
Topic 1	Advanced Policy-Based Routing (APBR): This topic emphasizes on advanced policy-based routing concepts and practical configuration or monitoring tasks.
Topic 2	Multinode High Availability (HA): In this topic, aspiring networking professionals get knowledge about multinode HA concepts. To pass the exam, candidates must learn to configure or monitor HA systems.
Topic 3	Advanced Network Address Translation (NAT): This section evaluates networking professionals' expertise in advanced NAT functionalities and their ability to manage complex NAT scenarios.
Topic 4	Logical Systems and Tenant Systems: This topic of the exam explores the concepts and functionalities of logical systems and tenant systems.
Topic 5	Troubleshooting Security Policies and Security Zones: This topic assesses the skills of networking professionals in troubleshooting and monitoring security policies and zones using tools like logging and tracing.
Topic 6	Advanced IPsec VPNs: Focusing on networking professionals, this part covers advanced IPsec VPN concepts and requires candidates to demonstrate their skills in real-world applications.
Topic 7	Layer 2 Security: It covers Layer 2 Security concepts and requires candidates to configure or monitor related scenarios.

Juniper Security, Professional (JNCIP-SEC) Sample Questions (Q38-Q43):

NEW QUESTION # 38
Exhibit:

The Ipsec VPN does not establish when the peer initiates, but it does establish when the SRX series device initiates. Referring to the exhibit, what will solve this problem?

A. The screen configuration on the untrust zone needs to be modified.
B. IKE needs to be added for the host-inbound traffic on the VPN zone.
C. IKE needs to be added to the host-inbound traffic directly on the ge-0/0/0 interface.
D. Application tracking on the untrust zone needs to be removed.

Answer: C

NEW QUESTION # 39
Refer to the Exhibit:

Which two statements about the configuration shown in the exhibit are correct?

A. The local IKE gateway IP address is 203.0.113.100.
B. The remote IKE gateway IP address is 203.0.113.100.
C. The remote peer is assigned a dynamic IP address.
D. The local peer is assigned a dynamic IP address.

Answer: B,C

Explanation:
The two statements about the configuration shown in the exhibit are correct are:
A) The remote IKE gateway IP address is 203.0.113.100. The exhibit shows that the address option under the gateway statement is set to 203.0.113.100, which specifies the IP address of the primary IKE gateway. The address option is used to configure the IP address or the hostname of the remote peer that has a static IP address1.
D) The remote peer is assigned a dynamic IP address. The exhibit shows that the dynamic option under the gateway statement is configured with various attributes, such as general-ikeid, ike-user-type, and user-at-hostname. The dynamic option is used to configure the identifier for the remote gateway with a dynamic IP address. The dynamic option also enables the SRX Series device to accept multiple connections from remote peers that have the same identifier2.
The other statements are incorrect because:
B) The local peer is not assigned a dynamic IP address, but a static IP address. The exhibit shows that the local-address option under the gateway statement is set to 192.0.2.100, which specifies the IP address of the local IKE gateway. The local-address option is used to configure the IP address of the local peer that has a static IP address1.
C) The local IKE gateway IP address is not 203.0.113.100, but 192.0.2.100, as explained above.
Reference: gateway (Security IKE) dynamic (Security IKE)

NEW QUESTION # 40
You are enabling advanced policy-based routing. You have configured a static route that has a next hop from the inet.0 routing table. Unfortunately, this static route is not active in your routing instance.
In this scenario, which solution is needed to use this next hop?

A. Use transparent mode.
B. Use filter-based forwarding.
C. Use policies.
D. Use RIB groups.

Answer: D

Explanation:
To enable advanced policy-based routing in Junos OS and activate a static route with a next-hop address in the inet.0 table within your routing instance, you should utilize RIB groups. RIB groups allow you to import routes from one routing table to another. In this scenario, the static route within the routing instance needs access to the inet.0 routes, which is facilitated by configuring a RIB group. Juniper's documentation outlines RIB groups as a necessary component for handling instances where routes need to be shared across routing tables, thereby ensuring seamless traffic flow through specified routes. For more details, refer to the Juniper Networks Documentation on RIB Groups.

NEW QUESTION # 41
Click the Exhibit button.

You have configured a CoS-based VPN that is not functioning correctly.
Referring to the exhibit, which action will solve the problem?

A. You must use inet precedence instead of DSCP.
B. You must change the loss priorities of the forwarding classes to low.
C. You must delete one forwarding class.
D. You must change the code point for the DB-data forwarding class to 10000.

Answer: C

Explanation:
Comprehensive Detailed Step-by-Step Explanation with All Juniper Security References Understanding the Problem:
* A CoS-based VPN has been configured but is not functioning correctly.
* The exhibit shows that under the class-of-service configuration, six forwarding classes are defined.
Forwarding Classes in the Exhibit:
* best-effort
* ef-class
* af-class
* network-control
* res-class
* web-data
Juniper CoS-Based VPN Limitations:
* Maximum Number of Forwarding Classes: In CoS-based VPNs (Layer 3 VPNs), there is a limitation on the number of forwarding classes that can be used.
* Supported Forwarding Classes: Only up to four forwarding classes are supported in an L3VPN for CoS purposes.

NEW QUESTION # 42
Refer to the Exhibit.

Referring to the exhibit, which three topologies are supported by Policy Enforcer? (Choose three.)

A. Topology 4
B. Topology 1
C. Topology 3
D. Topology 5
E. Topology 2

Answer: A,B,C

Explanation:
Reference: https://www.juniper.net/documentation/en_US/junos-space17.2/policy- enforcer/topics/concept/policy-enforcer-deployment-supported-topologies.html

NEW QUESTION # 43
......

The Security, Professional (JNCIP-SEC) (JN0-637) practice questions give you a feeling of a real exam which boost confidence. Practice under real Security, Professional (JNCIP-SEC) (JN0-637) exam situations is an excellent way to learn more about the complexity of the Juniper JN0-637 Exam Dumps. You can learn from your Security, Professional (JNCIP-SEC) (JN0-637) practice test mistakes and overcome them before the actual JN0-637 exam.

JN0-637 Pass Test Guide: https://www.actual4test.com/JN0-637_examcollection.html